D10 SMART industrial sliding gate motor
The D10 SMART commercial and heavy industrial sliding gate motor – suitable for gates weighing up to 1000kg. 24V battery backup.
The legendary high-volume performer. The powerhouse of heavy-duty access control. The intelligent choice in commercial and industrial gate automation. Now with award-winning SMART technology.
Main features:
- Taking intelligence to the next level – a machine crafted for excellence and perfected through innovation
- Pushing the limits of technology to bring you the ultimate in strength, security and endurance – suitable for gates weighing up to 1t
- SMART hardware and SMART connectivity provide the best experience for installers
- Intelligent theft and break-in protection with an integral vibration sensor and patented theft-deterrent cage
- More space and dedicated accessory tray for complementary solutions such as GSM devices
- World-class reliability with a sealed gearbox and improved, more secure manual release mechanism
- Die-cast aluminium gearbox coupled with a high-torque DC motor built for pure power and performance
- Uncompromising security, uninterrupted convenience with 24V battery backup
- Instant access to advanced, in-app diagnostics and logs, monitoring system health in real time
- Accurate and safe position control incorporating reliable Hall Effect technology
- Improved wire routing
- SMART universal controller – compatible with all CENTSYS SMART sliding gate operators
Technical Specifications:
| D10-SMART | ||
|---|---|---|
| Input voltage | 90V - 240V AC +/-10% @ 50Hz | |
| Current consumption (Mains) | 250mA | |
| Battery charger current output | 1.8A @ 27.4V +/-1% | |
| Motor voltage | 24V DC | |
| Motor power supply | Battery-driven (Standard Capacity - 2x 12V 7.2Ah) | |
| Current consumption (motor at rated load) | 8A | |
| Input / Output sink currents (Max accessory current draw) | ||
| I/O 1-4 | 100mA (12/24V) | |
| I/O 5 and 6 | 3A (12/24V) 10sec Pulse | |
| Motor push force - starting | 40Kgf | |
| Motor push force - rated | 30Kgf | |
| Gate mass - maximum | 1000Kg | |
| Gate length - maximum | 50m | |
Gate speed (varies with load)
| Up to 26m/min/ 433mm/sec
| | |
| Manual Override | Lockable with key release | |
| Drive Pinion | 17T Module | |
| Performance during battery backup (no mains power) with 2x 7Ah batteries | Power saving (15m/min 15kgf) Normal (26m/min 15kgf) | |
Half day
| 118 | 63 |
| |
Full day
| 93 | 50 |
| |
| Collision Sensing | Electronic | |
| Operating temperature range | -15°C to +50°C | |
| Onboard receiver type | Code-hopping multichannel receiver with selective add and delete | |
| Receiver code storage capacity | 1500 Remotes | |
| Receiver frequency | 433.92MHz | |
| Degree of protection | IP54 | |
| Mass of unit packed (with standard kit, but excl. rack and battery) | 13Kg | |
| Packaging dimensions (with standard kit, but excl. rack and battery) | 350mm wide x 282mm deep x 470mm high |
- Can operate off a solar supply, consult your local dealer for assistance
- Based on 25°C ambient temperature and unit not in direct sunlight
- Based on a motor push force of less than 50% of rated (Starting and Running forces)
- Gate opening and closing speeds can be configured to run slower depending on the requirements of individual installations
- Can increase battery capacity for longer standby times
- Based on 4m gate, excluding all accessories
- Multiple buttons per remote can be used
- Refer to the table below for D10 TURBO SMΔRT’s recommended gate speed for specified gates masses